What are ACP façades?
ACP (aluminium composite panel) façade signage uses panels made of two thin aluminium skins bonded to a core. The panels are fixed to a steel or aluminium frame to create a flat, weather-resistant fascia or cladding, and the brand letters or logo are mounted on top or cut into it.
A good ACP façade depends on the frame behind it. We measure on site, plan panel joints so they line up with the architecture, and prepare the frame so letters can be fixed and wired cleanly.
Where it works
- Shop and showroom fascia bands
- Full storefront and building-front cladding
- Petrol pump, highway and commercial frontages
- Backgrounds for letters, logos and lightboxes
Material options
- ACP panels in solid, metallic, brushed, wood-look and stone-look finishes
- Fire-retardant (FR) core panels, which we recommend for building façades; standard-core panels are lower cost
- Frames in mild steel (painted) or aluminium sections
- Weather sealant at joints and edges
Lighting options
- Front-lit or halo-lit letters mounted on the ACP
- Routed ACP: letters cut out of the panel and backed with acrylic, lit from behind
- Façade wash or strip lighting on the fascia edge
Finish choices
- Panel colour matched to brand guidelines where possible
- Grooved or flush joints
- Concealed fixings for a cleaner face
Care and maintenance
- Wash panels periodically to remove dust and pollution film.
- Check joint sealant and frame fixings, especially after the monsoon.
- Repaint any exposed steel frame to prevent rust.
What affects the cost
| Factor | Why it matters |
|---|---|
| Façade area | Panels and frame are priced by area |
| Panel grade and core | FR core and special finishes cost more |
| Frame design | Height, wind exposure and wall condition affect the frame |
| Letters and lighting | Priced separately from the cladding |
| Access | Scaffolding or lifts for upper floors |
Common questions
What is FR-grade ACP?
FR means fire-retardant. These panels use a mineral-filled core that resists burning better than standard polyethylene cores. We recommend FR panels for building façades; your building or local rules may also require them.
Can letters be lit on an ACP fascia?
Yes. Letters can be front-lit or halo-lit and mounted on the ACP, or the letters can be routed out of the panel and backed with acrylic to glow from behind.
Last updated 13 November 2026
